Analogue Inputs – 4
Electronically balanced, pin 2 hot
CMRR : >60dB @ 1kHz
Maximum Level : >20dBu
Input Impedance : 10kΩ balanced
AES Inputs – 2 x 2 channel
Transformer balanced, pin 2 hot
AES Input Sample Rates : 8kHz to 96kHz
AES Input s/n Ratio : 139dB
Input Impedance : 110Ω
Analogue Outputs – 8
Electronically balanced, pin 2 hot
Maximum Level : >20dBu
Source Impedance : <60Ω
AES Outputs – 4 x 2 channel
Transformer balanced, pin 2 hot
Sample Rate : same as operating sample rate
Source Impedance : 110Ω
Performance
Frequency Response (20Hz to 20kHz) : +/-0.4dB
Dynamic Range : >115dB unweighted (in to out analogue)
THD + N (+10dB @ 1kHz) : 0.0013%
Latency : 1.074ms (in to out, analogue, 96kHz)
Processing
Input Gain (per channel) : -30 to +15dB in 0.1dB steps, mute, phase
Input Delay (per channel) : 0 to 1.3s in 10.4uS steps (at 96kHz)
Input Compressor (per channel) : Threshold (-30 to +22 dBu), Attack, Release, Ratio, Soft-Knee
Input Parametric EQ (per channel) : 6 bands – parametric, low shelf, high shelf, notch, band-pass
Input High-Pass Filter (per channel) : Up to 24dB/octave (Bensen / Butterworth / Bessel / Linkwitz-Riley)
Routing Inputs to Outputs : Choice of modes (Matrix Mixer, Free Routing, 1×8 crossover, 2×4 crossover, 4×2 crossover, 2×3 crossover + 2 Aux)
Output Parametric EQ (per channel) : 8 bands – parametric, low shelf, high shelf, notch, band-pass
Output Dynamic EQ (per channel) : 2 bands (48kHz only) – parametric/low shelf/high shelf, boost/cut above/below, threshold, ratio, attack, release
Output High-Pass and Low-Pass Filter (per channel) : Up to 48dB/octave (Bensen / Butterworth / Bessel / Linkwitz-Riley) at 48kHz (up to 24dB/octave at 96kHz)
Output Gain (per channel) : -30 to +15dB in 0.1dB steps, mute, phase
Output Delay (per channel) : 0 to 1.3s in 10.4uS steps (at 96kHz)
Output Limiter (per channel) : Threshold (-50 to +22dBu), attack, release, auto attack/release option
Presets : Up to 30
Comms
100Mbps Ethernet on rear panel (Ethercon connector)
USB Type B socket
Power Requirements
3-pin IEC input, fused
90-250VAC, 50-60Hz < 40W
Dimensions
Height : 44mm (1.75inch) 1U
Depth : 213mm (8.4 inches)
Width : 482mm (19 inches)
Weight
Net : 2.8kg
Shipping : 3.9kg
Due to continuing product improvement the above specifications are subject to change.